Surfaces
-
To what surfaces will Command™ Products stick?
Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard.
-
Will Command™ Products stick to brick?
No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).
-
Can I use Command™ Products on fresh paint?
Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting a week before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.
-
Can I use Command™ Products on wallpaper?
No. Most wallpapers are too delicate and can tear when adhesives are applied.
-
Can I use Command™ Products on glass windows?
It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For example: Do not use inside or outside on south or west windows. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.
-
Can I use Command™ Products on my car windows?
Due to weather temperature extremes, only Command™ Outdoor Products can be used on automobiles windows.
Climate and Temperature
-
Can I use Command™ Products in cold or hot areas?
Recommend applying to a clean, smooth, dry surface with temperature above 10°C and below 40°C. Temperatures outside this range may not be suitable for adhesive to a build strong bond with the surface and may lead to product failure.
-
Can I use Command™ Products in my car?
Because the adhesive could soften and lose adhesion above 125°F (51°C), we don't recommend using it in your car. In addition, vinyl dashboards and door panels contain high amounts of plasticizers to maintain flexibility, and this makes adhesion to these surfaces difficult. To adhere object in car, please consider Scotch® Super Strong Tape for Car Interior.
Product Information and Use
-
What are some possible uses for Command™ Products?
Hooks are perfect for closets, lockers, offices, kitchens, laundry rooms, store rooms, kids' rooms, dorm rooms, baths, boats and campers. Most package of hooks comes with extra strips so the hooks can be reused or repositioned.
Picture Hanging Strips are great for hanging frames on the wall and creating collages without wall damage.
-
What happens if I pull too hard and the strip breaks?
Simply heat up the base plate with a hair dryer to soften the adhesive. Then use dental floss to gently cut through the foam to remove the hook or hanger from the surface. Stretch or peel off the remaining adhesive. See How to Use
-
Why do I have to wait an hour before using the product?
The one-hour wait ensures that the adhesive has had enough time to build strong adhesion to the wall or surface.
-
Why can't I clean the surface with a household cleaner?
Many household and window cleaners leave behind a very thin layer of residue that affects how strongly the adhesive will bond to the surface.
-
Can I use more than one hook if I want to hang an item that's heavier than the weight listed on the package?
No. We don’t recommend it for hooks. Weight may not be distributed equally and can result in failure.
-
Is there latex in Command™ Strips?
No. Command™ Strips contain an adhesive that is a synthetic rubber resin and does not contain natural rubber latex.
-
Where can I buy Command™ Products?
Command™ Products are available at many retail stores and online. Visit our product catalog, click through to your favorite Command™ product, and navigate to the Where to Buy button to find a store near you.
Command™ Brand
Hong Kong - English | 中文
